Study summary

Evaluation of electrolyzed water as cleaning and disinfection agent on stainless steel as a model surface in the dairy industry

Food Control · 2016

Summary

Abstract

In the dairy industry, cleaning and disinfection of surfaces are important issues and development of innovative strategies may improve food safety. This study was aimed to optimize the combined effect of alkaline electrolyzed water (AEW) and neutral electrolyzed water (NEW) as s were significantly affected by surface roughness electropolished SSP required 10 min, 100 mg/L AEW at 30 C, whereas SSP without modification required 30 min, 300 mg/L AEW at 30 C. From confirmatory tests cells removed were 3.90 0.25 log CFU/cm2 for electropolished SSP, and 3.20 0.20 log CFU/cm2 for SSP without modification. NEW is non-corrosive, and can be advantageously used for environmentally friendly cleaning and disinfection processes.

Study details

  • Published in: Food Control 60 (2016): 320-328
  • Microbes studied: Pseudomonas aeruginosa, Enterococcus faecalis, Micrococcus luteus

Source

Read the full study (PDF)

Source: Food Control 60 (2016): 320-328

Conditions tested

ParameterValue
OrganismsEnterococcus spp., Pseudomonas spp.
Relevant sectorsContact surfaces, Food Processing, Food safety, Livestock
PublicationFood Control, 2016

Reading this responsibly

Published figures are obtained under controlled conditions, usually on clean surfaces or in defined matrices. Organic load, surface condition, temperature and application coverage all affect real-world performance. Use these numbers to design a protocol, then validate it on your own site with environmental swabbing.

Applying it

Concentrations in this range are within the adjustable output of every EcoloxTech commercial system, so implementing this protocol is a settings question rather than a procurement one. Where the claim needs to sit on a registered label, see HOCl-AS200, EPA Reg. No. 101112-1.

Source

View the published study

Turn the evidence into a protocol

We size the system, set the concentration and contact time, write the SOP and assemble the citations — free, and in writing.