Summary
Abstract
Due to the limitations associated with the of existing biocidal agents, there is a need to explore new methods of disinfection to help maintain effective bioburden control, especially within the healthcare environment. The transformation of low mineral salt solutions into an activated metastable state, by electrochemical unipolar action, produces a solution containing a variety of oxidants, including hypochlorous acid, free chlorine and free radicals, known to possess antimicrobial properties. Electrochemically activated solutions (ECAS) have been shown to have broad-spectrum antimicrobial activity, and have the potential to be widely adopted within the healthcare environment due to low-cost raw material requirements and ease of production (either remotely or in situ). Numerous studies have found ECAS to be highly efficacious, as both a novel environmental decontaminant and a topical treatment agent (with low accompanying toxicity), but they are still not in widespread use, particularly within the healthcare environment. This review provides an overview of the scientific evidence for the mode of action, antimicrobial spectrum and potential healthcare-related applications of ECAS, providing an insight into these novel yet seldom utilised biocides.
Study details
- Published in: European journal of clinical microbiology & infectious diseases 31.5 (2012): 641-653
- Microbes studied: Total Microbial Count
Source
Source: European journal of clinical microbiology & infectious diseases 31.5 (2012): 641-653
Conditions tested
| Parameter | Value |
|---|---|
| Organisms | Total microbial count |
| Relevant sectors | Healthcare |
| Publication | European journal of clinical microbiology & infectious diseases, 2012 |
Reading this responsibly
Published figures are obtained under controlled conditions, usually on clean surfaces or in defined matrices. Organic load, surface condition, temperature and application coverage all affect real-world performance. Use these numbers to design a protocol, then validate it on your own site with environmental swabbing.
Applying it
Concentrations in this range are within the adjustable output of every EcoloxTech commercial system, so implementing this protocol is a settings question rather than a procurement one. Where the claim needs to sit on a registered label, see HOCl-AS200, EPA Reg. No. 101112-1.