Summary
Abstract
The goal of this study was to enhance the antimicrobial effect of slightly acidic electrolyzed water (SAEW) through addition of synergistic treatment with ultrasound (US) and mild heat treatment in order to improve the microbial safety of fresh-cut bell pepper. To evaluate the synergistic effects, the Weibull model was used to mathematically measure the effectiveness of the individual and combined treatments against Listeria monocytogenes and Salmonella Typhimurium on the pepper. The combined treatment (SAEWUS60 C) resulted in the TR values of 0.04 and 0.09 min for L. monocytogenes and S. Typhimurium, respectively, as consequence of the minimum value. Subsequently, texture analysis was carried out to test the potential effect on quality of the samples due to the involved mild heat and ultrasound treatment. When compared to the control, there was no significant change (p 0.05) in the texture (color and hardness) of the samples that were treated by 1 min of the combined treatment (SAEWUS60 C) during storage at 4 C for 7 days. This combined treatment achieved approximately 3.0 log CFU/g reduction in the two pathogens. The results demonstrate that the involved hurdle factors which are ultrasound and mild heat achieved the synergistic effect of SAEW against the two pathogens. According to the results of texture analysis, 1 min of SAEWUS60 C is the optimal condition due to without negative influence on the quality of the samples during the storage. The optimal condition shows the enhanced antimicrobial effect of SAEW and enables to improve microbial safety of fresh bell pepper in food industry as a consequence of hurdle approach.
Study details
- Published in: Food microbiology 53 (2016): 165-171
- Microbes studied: Listeria monocytogenes, Salmonella enterica
Source
Source: Food microbiology 53 (2016): 165-171
Conditions tested
| Parameter | Value |
|---|---|
| Organisms | Listeria monocytogenes, Salmonella |
| Relevant sectors | Food Processing, Produce & Packing |
| Publication | Food microbiology, 2016 |
Reading this responsibly
Published figures are obtained under controlled conditions, usually on clean surfaces or in defined matrices. Organic load, surface condition, temperature and application coverage all affect real-world performance. Use these numbers to design a protocol, then validate it on your own site with environmental swabbing.
Applying it
Concentrations in this range are within the adjustable output of every EcoloxTech commercial system, so implementing this protocol is a settings question rather than a procurement one. Where the claim needs to sit on a registered label, see HOCl-AS200, EPA Reg. No. 101112-1.