Summary
Abstract
The results showed that all the samples had met the reproduction of detail test requirement after disinfection with HOCl, while a significant reduction in the surface hardness of type III stone samples was also shown.
Study details
- Published in: Jasim Z M, Abass S M (November 30, 2022)
- Microbes studied: /
Source
Source: Jasim Z M, Abass S M (November 30, 2022)
Conditions tested
| Parameter | Value |
|---|---|
| Relevant sectors | Dental, Public health |
| Publication | Jasim Z M, Abass S M (November 30, 2022), 2022 |
Reading this responsibly
Published figures are obtained under controlled conditions, usually on clean surfaces or in defined matrices. Organic load, surface condition, temperature and application coverage all affect real-world performance. Use these numbers to design a protocol, then validate it on your own site with environmental swabbing.
Applying it
Concentrations in this range are within the adjustable output of every EcoloxTech commercial system, so implementing this protocol is a settings question rather than a procurement one. Where the claim needs to sit on a registered label, see HOCl-AS200, EPA Reg. No. 101112-1.