Summary
Abstract
Listeria monocytogenes contamination in ready-to-eat (RTE) fish products, in particular in cold-smoked salmon is an important food safety concern. This study evaluated the antimicrobial activity of electrolyzed oxidizing (EO) water as a pretreatment method during the process of cold-smoked salmon to inactivate L. monocytogenes. In addition, the effect of EO water treatment on the sensory and textural quality of the final product was also evaluated. Raw Atlantic salmon (Salmo salar) fillets were inoculated with L. monocytogenes (with an approximately cell number of 6 105 CFU/g L. monocytogenes ATCC 19114) and treated with EO water at three different temperatures (20, 30, and 40 C) and at three different exposure time of 2, 6, and 10 min before the cold-smoking process. A combination of EO water and a mild temperature (40 C) had reduced L. monocytogenes populations by 2.85 log10 CFU/g. The sensory as evaluated by a consumer panel (N = 71) and texture, which was measured by texture analysis showed no significant changes between EO and mild temperature treated samples and the control.
Study details
- Published in: Food Control 60 (2016): 401-407
- Microbes studied: Listeria monocytogenes
Source
Source: Food Control 60 (2016): 401-407
Conditions tested
| Parameter | Value |
|---|---|
| Organisms | Listeria monocytogenes |
| Relevant sectors | Food Processing, Seafood |
| Publication | Food Control, 2016 |
Reading this responsibly
Published figures are obtained under controlled conditions, usually on clean surfaces or in defined matrices. Organic load, surface condition, temperature and application coverage all affect real-world performance. Use these numbers to design a protocol, then validate it on your own site with environmental swabbing.
Applying it
Concentrations in this range are within the adjustable output of every EcoloxTech commercial system, so implementing this protocol is a settings question rather than a procurement one. Where the claim needs to sit on a registered label, see HOCl-AS200, EPA Reg. No. 101112-1.